What's Inside a Starlight Room Kit? Full Checklist

A star ceiling installation is a fixed-location project. The fiber optic strands exit the panel and connect to a light engine installed above the ceiling or in an adjacent space. You do not move it once it's installed. The process is clearer when approached as an installation — structural, methodical — rather than a decor project.

Before you start: the fixed sequence

A star ceiling install has a fixed order. Each step assumes the one before it is complete and cannot be meaningfully adjusted once you move forward.

1. Measure and confirm ceiling grid or drop ceiling compatibility
2. Plan panel layout on paper
3. Order the kit that matches your panel count
4. Prepare ceiling access and routing path for fiber bundles
5. Install panels into the grid
6. Route fiber bundles to the light engine location
7. Connect fiber bundles to the light engine
8. Mount the light engine in the designated space
9. Test operation and adjust star brightness if needed

Step 1: Measure your ceiling grid

Star ceiling panels are designed to replace standard drop ceiling tiles. They install into the same T-bar grid used for standard acoustic tiles.

Continue reading...

Review the current Starlight Ceiling panel options and planning guides.